How to Put a Drill Bit in a Hammer Drill – Quick & Easy Guide

How to Put a Drill Bit in a Hammer Drill

Having a hard time drilling holes into concrete or masonry with regular drill right? To drill through concrete, you’ll need to upgrade your regular drill bit into a hammer drill and afterward get the right masonry-adapted machine.

This article will teach step-by-step how to change drill bits in hammer drills and explain which are the best hammer drill shovel pieces for concrete or masonry work.

Why Use a Hammer Drill for Concrete and Masonry?

A hammer drill offers a pounding action to take on durable materials such as concrete and brick, whereas an ordinary rotary exercise quite simply dishes out the bit. The hammering action pummels the masonry drill bit in further whilst rotation cuts into the hole.

Hammer drills require specialized SDS or Spline drill bits. These bits have a different shank that locks into the chuck and withstands the impact. Using the right tools makes drilling through concrete faster and easier. You’ll prevent excessive bit wear, overheating, and tool damage.

How to Change Hammer Drill Bits

Changing bits in a hammer drill is quick and straightforward:

• Make sure the drill is unplugged.
• Rotate the chuck until the jaws open enough to insert the SDS bit shank.
• Push the bit into the chuck as far as it will go.
• Turn the chuck clockwise while gripping the bit to tighten it. The bit should be firmly secured.
• Check that the bit is centered in the chuck before drilling.

Most hammer drills accept SDS plus and SDS max bits. Refer to your user manual for details on your model.

What Masonry Drill Bits Do You Need?

SDS masonry bits come in a range of styles for drilling holes in concrete and stone:

• SDS rotary hammer drill bits – General purpose for drilling in concrete and masonry.
• SDS masonry drill bits – For drilling anchor and fixture holes. Sturdy carbide tip.
• SDS tile/glass drill bits – Designed for drilling into tile or glass without cracking. Hollow ground tip.
• SDS chisel drill bits – For chipping into very hard concrete. The carbide tip is shaped like a chisel.

Look for carbide-tipped SDS bits for longevity. Match the bit diameter and length to your project needs.

Drilling Tips for Concrete and Masonry

Follow these best practices when using hammer drills and masonry bits:

• Use a hammer drill with at least 8 amps for power and impact. Variable speed is also recommended.
• Start drilling at low speed until the masonry bit engages, then increase to full speed.
• Let the tool do the work. Apply just enough pressure to maintain contact.
• Drill perpendicular to the surface and avoid angling the bit.
• Use a smooth in-and-out motion to clear dust and prevent binding.
• Apply water or lubricant to keep the bit cool when drilling deep holes.
• Replace worn masonry bits for best performance.

With the right hammer drill and SDS bits, you can power through concrete, brick, and stone. Take care when changing bits and drilling to prevent damage. Soon you’ll be drilling holes with confidence!

FAQs

How to Use Regular Drill Bit in Hammer Drill?

No, you will require specific SDS masonry drill bits. Regular drill bits will not have the appropriate shank and cannot handle being hammered.

In what materials can a Hammer Drill be used to drill?

Hammer drills are made for concrete, brick, mortar, and stone. They also are adequate to good for some metals, plastics, and wood in a pinch.

How much pressure should I apply when drilling?

Let the hammer drill do the work – just apply enough pressure to maintain contact with the surface. Too much pressure can damage the material orbit.

Why does my hammer drill keep jamming?

Buildup in the hole can cause binding. Use smooth in-and-out motions and water to clear debris. Ensure the bit is centered and perpendicular.

Key Takeaways:

• Hammer drills use impact force to drill into concrete and masonry
• Special SDS drill bits are required for hammer drills
• Changing bits is fast – open the chuck, insert the bit shank fully, tighten the chuck
• Carbide-tipped SDS rotary hammer bits are versatile for concrete drilling
• Let the hammer drill do the work, use water to keep it cool

Conclusion

To sum up the content, hammer drills, and SDS masonry bits are used to solve drilling tough materials such as concrete or stone. You can tackle your projects easily with the correct tools and methods. Please make sure you are following proper safety guidelines and reviewing the user manual of your hammer drill model.